Sew hot long arm quilting service

 It is no secret that I love getting my quilts long arm quilted. It is a super time and energy saver. I have had Cumbrian Long-arm quilter do so many of my quilts and I will always recommend her. However I was intrigued to see what it would be like to have my long arm quilting done by someone else. 

I was chosen to be a Sew Hot brand rep this year and it just so happens that as well as been a fabulous sewing shop, they also offer a quilting service. This seemed like the perfect time to try it. 

I had previously bought this Ruby Star Society unicorn panel (sadly sold out now) and was desperate to get it quilted and on my bed. I won a giveaway for fabric from the USA, so I chose a wideback that I loved but couldn’t find in the UK. It seemed like the perfect fabric choice for me and this quilt (Ruby Star Society have released a standard width fabric that is similar so would be a good alternative here.)

Next was the most difficult part of getting your quilt long arm quilted, choosing your design! Sew Hot have a great selection on their website, however nothing was really catching my attention. There is the option to visit 2 websites and have even more choice though. After a little searching, I found what I thought was the perfect design for this quilt, the swivel circle. 

They matched the thread colour perfectly to the quilt. After doing the quilt, it was time to do the pillows I sent. I wanted them to match, but the design I chose was quite large, so I was asked if I wanted to alter the size. I said 'yes please' and they did. I am so pleased they asked and I did as they look so much better for it. 

 One downside, is they don’t offer a binding service. The quilt comes back trimmed though, so putting the binding on myself isn’t too bad. 

Now it’s time to relax with some hand stitching, there is quite a lot so I might be a while. Finished quilt reveals coming soon hopefully.

Mx

scrappy triangle cushion

I made this cushion using my cotton + steel fabrics as part of my #100dayproject on Instagram. I grouped the fabrics into colour families and pieced half square triangles around a central economy block to create the design. The cushion finishes up at 18". If you would like to make your own, here's how to do it …

To create the patchwork, you will need to cut: 

1 blue square @ 4 3/4"

4 yellow triangles

8 navy triangles

20 cream triangles

20 pink triangles

12 peach triangles

4 teal triangles

 For the half square triangles, I use the easy angle ruler and cut to a 3 1/2". If you don't have this ruler, cut squares at 3 7/8th" and split on the 45 degree angle. 

For the economy block, position the first two triangles opposite each other, RST onto the central square. Align along the outer edges, pin and sew. Press open, then repeat for the remaining two sides as seen above. Trim the finished block to a square (this should be 6 1/2"). 

 To construct the half square triangle blocks, place two triangles RST, pin and sew along the long edge. Press open and trim to a square, removing the dog ears on the corners. Ensure all of the half square triangle blocks are the same size (this should be 3 1/2"). 

To put the cushion top together, I like to lay out all of my cut pieces to check I'm happy with the layout. I then stitch the centre block, followed by the surrounding half square triangles. I like to chain piece, so I prep all of the blocks and then stitch and press in stages. To join the blocks, I group into 4 patches around the centre, then piece together as shown above. 

I chose to hand quilt the top to highlight the diamonds created by the colours. I used aurifil 12WT and echo quilted, using a large quilting hoop to help with the tension as I stitched. Of course, you could machine quilt if your preferred. 

To finish the cushion, I created a concealed zip back (tutorial post here) and bound the edges with 2 1/4" binding (binding tutorial post here) for a neat finish to coordinate with my catty corner quilt (see here).

I'm pretty pleased with how this turned out and Millie approves too. I hope this blog helps you to create your own version. Of course, you can switch around the colour schemes for completely different looks to make use of your fabric scraps. 

Mx

mini travel sewing case

I have created my mini travel sewing case and I love it. It has a zip pocket and a slip pocket, optional felt needle minder and all fastens with a ribbon. 

I have made two so far, one to keep my sewing essentials in at home. The second is this scrappy patchwork one, that I'm planning to keep in the car with a small cross stitch kit in. Its super neat and perfect for travelling.

If you don't want to use it for sewing, fill it with what ever else you fancy, it also fits a passport and money nicely. 

 

You can now purchase the #minitravelsewingcase pattern in my Etsy store!

Mx

catty corner quilt

I recently got the chance to pattern test the catty corner quilt and I jumped at the chance. I have given my feedback and my quilt is all finished, so thought I’d share more about it here.

Although it was a small timescale, I chose to do the throw size and thought it would be manageable. I really wanted to make a scrappy cotton and steel quilt and this looked like a great opportunity to make it. The material requirements were slightly different to what I expected, but thankfully only needed to buy a couple of cuts to finish it all.

The first step was a fabric pull, I get my sister to help with this part. I think she enjoys it more than me, although she can get bossy at times. We sectioned my fabric in to colours, then ordered the cuts by size. I picked 5 fabrics from the bluebird range for the centres, even though no one would probably notice, I really liked the idea. We looked at the pattern and laid out some fabric to get a feel for how it would look, took pictures then re-arranged until it looked perfect.

 

 

 We originally had both black and navy but felt it was too dark, switched out the teal with cream but it was still just not quite right. We revisited the centres but I didn’t like them as much. I then wondered what it would be like without the black so we could have both the cream and teal... it was a winner.

I always take a photo when I choose fabrics. I have such a poor memory and would easily forget what was meant to go where without one. I did change a couple of fabrics around during the cutting and making process, but overall I mostly stuck with what I planned.
 

 

 

The main part of the pattern is only made of 4 large blocks, which are fairly easy to sew. The clever part of this pattern is in the placement and the extra cutting. Of course I wont go into details... you need to buy the pattern for that!! It is quite a large throw and required a bit of very large cutting, so I thought I’d share a funny progress shot of the measures to keep it in place for trimming...

 

I thought about quilting this throw myself but decided to treat myself to it been long arm quilted instead. I knew I would struggle to get it finished in time to a high standard, plus sending it away also meant I could do some other sewing at the same time my quilt still got quilted. I decided since it was going away, it might as well have a fancy back too. I decided to make an extra block and couple of halves to piece a section of the back. For the remaining section, I chose a cream and pink sprinkle. I had bought a big piece so this was the perfect opportunity to use it.

 When you send a quilt to be long arm quilted, the backing and the batting/wadding need to be 4 inches bigger than the top on all 4 sides. I didn’t quite have enough fabric (plus I didn’t want to loose too much patchwork, so I added extra borders using some cheap fabric my mum had bought years ago. Believe it or not, it was only 30p a metre from a market! The backing did look a bit funny when I sent it off, but this was only temporary. Given it's size, it was rather hard to photograph and this was the best I could capture...

 

 
For the quilting I chose a geometric pattern, diagonal plaid, which used squares. I liked the way it reflected the quilt blocks and thought it would look more modern than a swirly design. I’m so pleased with how it looks now the quilt is finished. I got Cath (Cumbria long arm quilting) to trim and attach the binding for me too... did you know they can do that ?! I didn't get it done last year with my meadowland and regretted it as I struggled with the trimming and attaching on a domestic machine with the size and weight of the quilt. Since I didn’t have the time to dither about this one, having it done saved me the trouble. It was lovely to have it come back all ready for me to just hand stitch the reverse of the binding to finish.

I am quite slow at hand stitching and I found the black cotton and binding harder than on previous quilts. Saying that, I probably finished in record time with the deadline spurring me on !! I was so happy with how it looked once finished and was excited to get photos. However, British winter is notoriously quite dark and windy, but luckily we had a window of nice light and took advantage. Mum was on hand to go up the ladder to hold the quilt whilst I took as many photos as possible. It was still quite windy but I think we got a nice photo.

As for the back, Cath did a super job of lining it up with plenty of patchwork on show at the bottom. The wind picked up and the picture isn’t quite as good but it’s the best we could do.

 If you want to see the individual blocks and some more photos of the quilt details, you can see them over on my instagram @craftylilmouse . I love how this quilt looks, it is so bright and modern. It's also lovely that it includes so many lovely cotton and steel prints and to get to use up quite a lot of my stash was a bonus! I think this is a great quilt pattern... if you'd like to make your own, the quilt pattern will be on sale soon. I'd also recommend a visit to stitch and yarn's etsy store for more of her patterns too.

 

Mx

Meadowland quilt

 

I wanted to share this quilt with you now that it is finally finished... it took most of 2019 to complete, but I am super proud of it!!

I decided to join the quilt-a-long on instagram for the meadowland quilt, run by the pattern designer @thencamejune. This ran from February 25th for 6 weeks to finish with the quilt top. I had bought the my minds eye for riley blake 'blush' collection with the intention of making myself a quilt to go on my bed, so this seemed like the perfect excuse to start. Although the deadlines were stressful, they did keep me motivated to stick with it and keep sewing.

 

 

The hardest thing was choosing the fabric placement to get a nice mix of colours and prints across the quilt top. It was the first time I had followed a proper pattern for a quilt so working the fabrics into the existing design was something new for me. I was originally going to just go for it and let it be random, but ended up opting for a repeat of four blocks which used all of the fabrics once.

Once happy with the design, I began making. I cut all of my pieces out and used the chain piecing method to speed up the initial sewing process. I was very cautious with the flying geese sections to ensure my fabric ran in the same directions and the points matched perfectly. I'll admit there were some tears and unpicking to shift the blocks over just a few mm's to get it right and although not perfect it's as near as is possible !!

 

 

I made the quilt top to one of the largest sizes on the pattern and when it was pieced, it was quite an impressive size. It covers a double bed easily and meant a few step ladders were needed by my helpers to get a full length photo !!

 

Given the size of the quilt, I decided to treat myself to having it long arm quilted. I pieced the pink backing fabric and sent it off to the cumbrian longarm quilter and chose a nice swirly design as I didn't want to clash with the fabrics or patchwork design. I got it back in early May, around my birthday and was super excited to see it quilted, but also daunted by the prospect of trimming and binding it.

 

 

When December came around, I was determined to get the quilt done before Christmas, so I got some help to get the binding on and sat with Christmas films to hand finish the 9m of binding.

 

 

On Christmas eve, I finally had a completed quilt. With the festivities, I didn't get around to laying it out and photographing it. I would have liked to have taken it to the coast for some pretty pictures with scenery, but instead opted for keeping it clean and showing it on the bed !!

 

 

I'm rather proud of this quilt as it's my biggest one to date and I get to keep it and enjoy it for years to come. I'm also pleased to say it's another project ticked off my finish-a-long list too.

 

Mx

Glam bag

I made this bag as part of a Christmas gift for a friend. She's a beautician so when I saw these fabrics, I knew they would be perfect for her bag. I mixed prints from the 'Kiss me, Kate' range by See Kate Sew for Riley Blake and 'Glam Girls' by American Dream House for Michael Miller.

 

I designed the panels to mix the fabrics and spread the colours. I then worked out the quilty maths and cut my pieces as follows:

 

lips: 15 1/2" x 3 1/2"  +  14 1/2" x 3 1/2"

xox: 3 1/2" x 4 1/2"  +  3 1/2" x 4 1/2"

bows: 9 1/2"x 2 1/2"  +  3 1/2" x 5 1/2"

lipsticks: 6 1/2" x 6 1/2"  +  6 1/2" x 4 1/2"

eyelashes: 9 1/2" x 4 1/2"  +  3 1/2" x 4 1/2"

stripe: 6 1/2" x 4 1/2"  +  6 1/2" x 5 1/2"

 

The panel was made using the quilt as you go method with 1/4" quilting and seam allowances. I then added the sequin print to the top and base with 1/2" quilting. I created the handles with the same sequin fabric, with interfacing for strength and batting for comfort.  

 

 

I boxed the corners on the base and lined with the bows fabric to finish. I also added a little handmade label into the side seam.

 

 

I'm pretty pleased with how the bag turned out and think it's a useful size... Thankfully my friend is also pleased with it!! This is one of my finish-a-long projects which you can find here.

 

Mx

Sally’s choose and sew supply case...

 

One of the gifts I choose to make for Sally (my birthday stitchers partner) was a choose and sew supply case. She had suggested needing a sewing case for her EPP supplies. When she made herself the case I was planning on, I decided to make my own pattern.
 

I had already started planning the supply case, but thought Sally would prefer different options to me. We are good friends on instagram, so without giving it away that I was making for her, I asked what she’d prefer. I planned and worked out measurements. Next was fabric choice, cotton and steel was an obvious choice. I picked some patterns and colours I thought Sally would like, but wasn’t convinced by any for the outer of the case. I decided I’d join the #100hexies100days challenge on instagram and join them together for a cute fussy cut panel. Since I was making a large case, it took more than 100 and I was quite a long while hand stitching, but I’m so pleased I did now. 

For the inside of Sally’s supply case I decided to make a vinyl workspace with 2 pockets and a piece of felt, then a zip vinyl pocket at the back for storage. I did the binding with a flap closure construction method on this case. Of course, I made one of the snap in pouches and have sent the measurements to Sally for her to be able to make as many more as she wants. 
 

 

I also made some beaded zip pulls to finish it nicely. I really hope Sally likes her choose and sew supply case and finds it useful.
 

The pattern for the choose and supply case is now available in my Etsy store. It is a large pattern with 2 sizes and has lots of pocket options and 2 construction methods. It means you can make tons of different combinations, so that you can make the perfect case for you and maybe even one for a friend!
 

This project was also one of my finish a long projects, you can read  more of my list here.

Mx

My Christmas stocking

For a few years I have seen a Christmas stocking sew along on instagram. It is hosted my @sunnydaysupply and all the stockings they feature are fabulous... I just had to make my own!

I was going to join in last year, I even started, the plan for my patchwork soon changed though and that patchwork turned into a cushion that was gifted to a friend.

Fast forward to this year and although I had too many projects already, I started my stocking again. This time I wanted to try something different and just have some fun sewing. I decided I would use the scraps I had left from cutting out a quilt. It is some heather Ross sugarplum fabrics, with cute mice! I then chose to patchwork using the quilt as you go method. I have seen it lots on instagram but not found the right project to actually try it... til now.

It was so much fun to just add pieces and quilt, although I did consider fabric placement a little. I did end up with a white patch on one side, but I still think it looks ok especially since its only the one side. I wasn't planning to do both sides, but I was enjoying sewing and had scraps left, so I figured why not?

I finished quilting both sides of my stocking and trimmed to the same size. I cut out the matching check lining, which was a big  piece left over from the same quilt.

Once I had sewn it all together, I still felt like it was missing something. I decided I'd add a pom pom trim... I have kept buying them without a project and they seemed like the perfect finishing touch for this. As it was my first time sewing pom poms, I went for a simple straight top stitch in the middle of the band. I did have to change to a zipper foot on my machine to get past the pom poms. Part of me wishes I had taken the time to hand stitch them in place, however, I think it looks neat enough to be happy as they are.

This was a lot of first times and I am so pleased with how it has come together.

If you want to see more great stocking inspiration, visit the #sunnystockingsal on instagram.

Mx

Binding tutorial: method 1

There are two main methods of binding that I use. The first is a simple binding for smaller projects and the other I mainly use for quilts. I thought I'd write a tutorial for each. The first one today and then the second next month.

Method 1 uses 2” strips of fabric and is sewn on to your project with a 1/2” seam allowance. I sometimes join on the bias however in this example I have used straight seams. The benefits of straight seams are that it requires less fabric and is easier to sew.

 

  

 Cut 2” strips the width of fabric (110cm = WOF)

Place 2 strips right sides together and pin the 2" width at one end. Sew together using a 1/4” seam allowance, then press the seams open. 

 

Press the strips in half lengthways, wrong sides together. Then, bring the long raw edges into the middle crease and press along again.

To attach the binding to your project:
1. Clip the binding onto the bottom edge with a few inches extra at the end for joining later. Stitch the binding on using a scant 1/2"seam allowance.
2. Measure and mark 1/2" from the corner and stop stitching when you reach the mark.

3. To shape the corner, fold the binding down wrong side together, vertically in line with the edge of the project, to create a 45 degree angle on the corner. Holding the corner in place, fold the binding back up and clip in place ensuring it is aligned along the corner edges.

4. Stitch from the bottom edge up to the next corner, stopping 1/2” before the end.

5. Repeat step 3 for each corner and continue sewing until you have about 3” before you reach the start of the binding, then stop.
6. To join the two ends, mark a line about 1” in from the end then fold it back on itself, wrong side together. Lay the other end of the strip over the top, right sides together and pin, only catching the top 2 layers of fabric.

7. Fold over to check, that it lays flat and the binding strips meet at the marked line. Make sure to secure the join in place with pins before you move it to sew.

8. Move the binding so the join overhangs the project. Stitch along the marked line to join the 2 layers of binding together. Once sewn, double check the binding lays flat along your project and trim to leave a 1/4"seam allowance, then press the seam open.

9. Stitch the joined section of binding to the project, again using the scant 1/2" seam allowance.

To finish your binding, turn over your project. Bring the binding over to the back, folding the raw edge in and the folded edge down. Clip to hold in place and hand stitch in place on the reverse. I use a ladder stitch although a slip stitch would also be fine. Alternatively, you can use a machine to top stitch close to the edge of the binding.

Mx