Glam bag

I made this bag as part of a Christmas gift for a friend. She's a beautician so when I saw these fabrics, I knew they would be perfect for her bag. I mixed prints from the 'Kiss me, Kate' range by See Kate Sew for Riley Blake and 'Glam Girls' by American Dream House for Michael Miller.

 

I designed the panels to mix the fabrics and spread the colours. I then worked out the quilty maths and cut my pieces as follows:

 

lips: 15 1/2" x 3 1/2"  +  14 1/2" x 3 1/2"

xox: 3 1/2" x 4 1/2"  +  3 1/2" x 4 1/2"

bows: 9 1/2"x 2 1/2"  +  3 1/2" x 5 1/2"

lipsticks: 6 1/2" x 6 1/2"  +  6 1/2" x 4 1/2"

eyelashes: 9 1/2" x 4 1/2"  +  3 1/2" x 4 1/2"

stripe: 6 1/2" x 4 1/2"  +  6 1/2" x 5 1/2"

 

The panel was made using the quilt as you go method with 1/4" quilting and seam allowances. I then added the sequin print to the top and base with 1/2" quilting. I created the handles with the same sequin fabric, with interfacing for strength and batting for comfort.  

 

 

I boxed the corners on the base and lined with the bows fabric to finish. I also added a little handmade label into the side seam.

 

 

I'm pretty pleased with how the bag turned out and think it's a useful size... Thankfully my friend is also pleased with it!! This is one of my finish-a-long projects which you can find here.

 

Mx

Butterfly cross stitch

 

I made this little gift using the butterfly hoop kit from cross-stitch crazy magazine I got a while ago. I followed the kit to stitch up the butterflies on the front, but didn't like the plastic hoop supplied with it. I decided to paint a wooden hoop the same size using my own custom mixed lilac shade of Annie Sloan (I'm afraid I can't remember which colours went into it!).

 

 

I added the coordinating fabric to finish the back of the hoop, first glued and then ladder stitched to secure it in place. The final touch was some organza ribbon to create a hanging loop and bow to cover the screw.

 

 

I finished this project earlier, but couldn't share until now as it was part of a Christmas gift. It is on my Q4 finish-a-long list which you can find here ....

 

Mx

Bunnies and blossoms pouch

I decided to take part in one Christmas swap this year, but wanted something a bit easier than last year. The #simpleandsweetchristmaspouchswap was perfect!

The guidelines were one pouch made to your partners preferences, with a nice size limit (maximum size 15”x12”, minimum 8”x6”). The parcel could also include 1 or 2 Christmassy extras. I was given Naomi as my swap partner aka @naomic08 on Instagram. I was very happy to be making for her, since she had made a wonderful cotton and steel swap parcel for me... see this here. 

Firstly, I decided I would make one of my snappy zip pouches but would enlarge it a little. My final pouch measurements were 10 1/2”x 9 3/4”. I couldn’t decide what fabrics to choose, so I gathered a few options and posted about it on Instagram. I had been eager to use these cute bunnies and blossoms fabrics for a while and was thrilled when Naomi commented she liked them too.  

 

I went for a patchwork panel, to include plenty of the fabrics with a few cute fussy cuts too. Simple straight line quilting, 1/2” apart worked out well too. I used the strawberries for the main pouch lining and the pink lace check for the flap and zip pocket lining. I decided not to quilt the flap and am pleased I didn’t now.

I found the sweet little strawberry bead in my jewellery supplies and made a cute zip pull charm with it. I love the way this pouch looks and hopefully Naomi does too!

My pattern is available on Etsy here, if you fancy making your own version of this pouch.

 

This was also one of my finish-a-long projects. See more of my list here, and visit their blog for more details about the challenge. 

Mx

Christmas coin purse...

This Christmas, I am taking part in the #simpleandsweetchristmaspouchswap on Instagram. For the swap you needed to make one pouch and up to two Christmassy extras. I will be sharing the main pouch after Christmas, I have already shared my first extra here and this is the second extra I sent...

 

It is a simple coin purse for all those festive shopping trips... or I imagine it might hold a small Christmas stitching project.

 

I used cotton and steel Noel and tinsel fabrics, plus some basics in the pink colours. I did some scrappy patchwork to make the most of the fabric I had, plus the chance to include more prints. I did  choose the cute candy cane print for the lining. I added a little star charm to the zip pull as a final detail. Since my partner had said she liked these fabrics, I really hope she likes what I made.

If you want to make your own zip pouch, but don’t know where to start, I made this tutorial a while ago. Read it here!

I am also including this project as one of my finish-a-long Q4 finishes. You can view my list here and learn more about the challenge on their blog here.

Mx

a Christmas banner...

This Christmas I am taking part in the #simpleandsweetchristmaspouchswap on Instagram. For the swap you needed to make one pouch and up to two Christmassy extras. More about the pouch I made later, but here is the first of my extras.

 

I made this little Christmas decoration banner. I used some of the moda merriments fabrics I had left over from my escape and create blog project (read about this here). Since my partner didn’t want too traditional, I thought this was quite a good choice with the snowflakes. Since the colours were still abit traditional though, I tried to hand letter the ‘Merry Christmas’ in quite a modern style.

I hand stitched the letters with a coordinated thread colour, then added sparkle with some silver thread over the existing snowflakes.

 

 

Once I’d finished stitching, I placed my two fabrics right sides together and drew my banner shape. I stitched along the lines, leaving a turning gap, then trimmed excess bulk from the corners. I turned it out and gave it a good press before stitching closed the gap. I used the silver thread again to top stitch around the edge of the banner. I folded over the top and top stitched in place. I added a section of paper straw inside the fold to hold the banner and threaded some twine through for hanging tied with a little bow in the top, so my partner can either hang it straight up or re-tie it around something.

 

 

The banner needed one final detail though... a tassel. Since I didn’t have one and wanted it to match, I decided to make my own. Although I’m happy with the results, please remind me not to do this in future! If you would like to make your own, I've included the template for the lettering below.

 

This is one of my Q4 finishes for the finish-a-long challenge, read more about my list here.

Mx

Sally’s choose and sew supply case...

 

One of the gifts I choose to make for Sally (my birthday stitchers partner) was a choose and sew supply case. She had suggested needing a sewing case for her EPP supplies. When she made herself the case I was planning on, I decided to make my own pattern.
 

I had already started planning the supply case, but thought Sally would prefer different options to me. We are good friends on instagram, so without giving it away that I was making for her, I asked what she’d prefer. I planned and worked out measurements. Next was fabric choice, cotton and steel was an obvious choice. I picked some patterns and colours I thought Sally would like, but wasn’t convinced by any for the outer of the case. I decided I’d join the #100hexies100days challenge on instagram and join them together for a cute fussy cut panel. Since I was making a large case, it took more than 100 and I was quite a long while hand stitching, but I’m so pleased I did now. 

For the inside of Sally’s supply case I decided to make a vinyl workspace with 2 pockets and a piece of felt, then a zip vinyl pocket at the back for storage. I did the binding with a flap closure construction method on this case. Of course, I made one of the snap in pouches and have sent the measurements to Sally for her to be able to make as many more as she wants. 
 

 

I also made some beaded zip pulls to finish it nicely. I really hope Sally likes her choose and sew supply case and finds it useful.
 

The pattern for the choose and supply case is now available in my Etsy store. It is a large pattern with 2 sizes and has lots of pocket options and 2 construction methods. It means you can make tons of different combinations, so that you can make the perfect case for you and maybe even one for a friend!
 

This project was also one of my finish a long projects, you can read  more of my list here.

Mx

Dashwood advent

After making a stocking last year for a friends little girl, I decided an advent calendar would be perfect for this Christmas. I picked out the dashwood studio panel, with a very cute illustration, and little pockets for chocolate coins.
 

 

After I’d cut out the pockets, I decided to wundaweb all of the sides down to help stop it fraying with use. I top stitched across all of the top edges and then stitched all the pockets on to the panel.
I cut a piece of backing and wadding to the same size as the advent panel. I also cut out 4 rectangles of backing fabric to create hanging loops. With these, I stitched 2 pieces of backing fabric wst, then turned it out and repeated to create 2. I topstitched the two pieces in place to the upper section of the backing, leaving a gap between them. I then stitched the advent rst to the backing and wadding pieces, trimmed some wadding from the seam allowance and turned out. I stitched up the turning gap and added some top stitching/quilting to the advent to hold the layers together. I cut a piece of dowel to size and threaded it through the tubes. I then ladder stitched both outer ends closed to stop it falling out. The gap in the middle means you can just hang it up or add a ribbon if you need too. 

 

This is one of my finishalong projects, you can check out the rest of my list here.

Mx