My liberty Collider cushion...

I had the pleasure of pattern testing for the collider quilt by made just sew. I was excited to get started when I saw the pattern, although I couldn't commit to an entire quilt, we agreed I would make one block into a cushion. I chose to use Liberty London tana lawn fabrics.

 To make the prints stand out a little I added a solid, I chose the art gallery pure solids, as they are a nice weight cotton to use with lawn fabrics. I used  the cotton candy pink since I didn't want white and thought it would work nicely with the prints I had picked out. If you fancy making your own cushion using this pattern, I made the throw size block to make an 18" cushion and used one fat quarter for all the background pieces.

The pattern is well written and came together nice and quickly. Since there's a lot of sewing and cutting on the bias, I did use best press to starch my fabrics before I started cutting and sewing. I would highly recommend this with this pattern and fabrics. I also used a 75/11 sized needle in my sewing machine because I was using the lawn fabric. 

I decided to do some hand quilting for this cushion. I used a 12 wt Aurifil thread in shade 2021. I used thread gloss to help with the stitching, its not necessary but I enjoy the smell and using it.   

Once it was all hand quilted, I was straight on to making it in to a cushion. 

To make the zip cushion back, I used my tried and trusted method. You can see my tutorial here on how I make them.

The collider pattern is lovely and I'm so happy with my new cushion. You can now buy the pattern here.

Mx

scrappy triangle cushion

I made this cushion using my cotton + steel fabrics as part of my #100dayproject on Instagram. I grouped the fabrics into colour families and pieced half square triangles around a central economy block to create the design. The cushion finishes up at 18". If you would like to make your own, here's how to do it …

To create the patchwork, you will need to cut: 

1 blue square @ 4 3/4"

4 yellow triangles

8 navy triangles

20 cream triangles

20 pink triangles

12 peach triangles

4 teal triangles

 For the half square triangles, I use the easy angle ruler and cut to a 3 1/2". If you don't have this ruler, cut squares at 3 7/8th" and split on the 45 degree angle. 

For the economy block, position the first two triangles opposite each other, RST onto the central square. Align along the outer edges, pin and sew. Press open, then repeat for the remaining two sides as seen above. Trim the finished block to a square (this should be 6 1/2"). 

 To construct the half square triangle blocks, place two triangles RST, pin and sew along the long edge. Press open and trim to a square, removing the dog ears on the corners. Ensure all of the half square triangle blocks are the same size (this should be 3 1/2"). 

To put the cushion top together, I like to lay out all of my cut pieces to check I'm happy with the layout. I then stitch the centre block, followed by the surrounding half square triangles. I like to chain piece, so I prep all of the blocks and then stitch and press in stages. To join the blocks, I group into 4 patches around the centre, then piece together as shown above. 

I chose to hand quilt the top to highlight the diamonds created by the colours. I used aurifil 12WT and echo quilted, using a large quilting hoop to help with the tension as I stitched. Of course, you could machine quilt if your preferred. 

To finish the cushion, I created a concealed zip back (tutorial post here) and bound the edges with 2 1/4" binding (binding tutorial post here) for a neat finish to coordinate with my catty corner quilt (see here).

I'm pretty pleased with how this turned out and Millie approves too. I hope this blog helps you to create your own version. Of course, you can switch around the colour schemes for completely different looks to make use of your fabric scraps. 

Mx

Birthday stitchers swap 2020... what i made!!

I decided to take part in the birthday stitchers swap on Instagram again this year. I was so pleased to be making for one of my close friends again too! I had so much to choose from the inspiration mosaic Zena made, it was full of fun ideas and I was quickly excited to get started. 

For the main make I chose to make a quilted tote bag with strawberry patchwork. I used similar construction to the previous one I had made, but changed the measurements (I'm hoping to do a tutorial blog for this soon!). I knew Zena had already received a larger grey tote, so it would be nice to make something different and a bit smaller. The smaller size also made more sense to fit the size of the patchwork strawberry

To make the bag I used red and green scraps for the strawberry patchwork and Everglades by Betsy silver for Michael Miller for the white. I added an Essex linen in ‘midnight’ to finish the bag outer nicely. For the lining, I used Strawberry tea by Axelle design for Michael Miller and added a slip pocket inside. This print felt like the perfect match for the patchwork design on the outer. I picked the Aurifil thread in shades 2745 & 2021 to use as I thought the colour matches were great

For the small makes, I started with a medium sized sewing case as Zena had included a few similar ones on her mosaic. I didn't want to purchase another sewing pattern, so I just made it up as I went along. I'm pleased with how it turned out, (although I'm sure there was a lot easier way to make it, so I wont go into that!) 



The main feature of this make for me though was the EPP. I didn't want to do just regular hexie shapes, but I don't feel quite ready for anything as fancy as clam shells. I decided a honeycomb was a nice option, it was a little different but still in my comfort zone. It also worked very well with the fussy cut images that I wanted to include. I felt it would be too much to make the entire case from patchwork, so I opted for a panel on each side instead. I joined my EPP shapes together, appliqued them onto the linen, then quilted over the top. This was the first time doing something like that and I'm so happy with how it looks. I used several prints from the Penny Rose fabrics 'bunnies & blossoms' by Lauren Nash range, some cream/ natural linen (I cant remember the shade colour) and Aurifil thread '2311'. I know Zena likes to add extra details into her makes, so I thought it was only right I did the same when making for her too. I made zip charms using some strawberry shaped beads and handmade hearts. I also used a single honeycomb shaped piece of fabric, appliqued on to the inside with stuffing in, to create a mini pin cushion!

Next was a small drawstring pouch with a pocket on the front. To make it, I used some cotton + steel fabrics. Zena said she likes neon's and I knew I had some prints that I had bought without a plan of what project to make with them. This seemed like the perfect opportunity to use them. I liked using the different prints but felt like they blended a bit to much, so I went in search for some trim and ribbon. The neon was a struggle to find and it isn't a perfect match, but it's close enough to make the pocket look pretty and fasten the pouch.

The last little make was one of my mini travel pinnies.  I used the Riley Blake 'little sweetness' range by Tasha Noel, which I know Zena loves and managed to fussy cut the little dresses for the front to really make a feature of the print. The extras that I bought for Zena was a Cath Kidston mug, a 'z' candle and some charms. The best gift wrapping for any sewist is fabric of course, tied with a big ribbon. I also made a little scrappy keyring that served as a gift tag! 

It was a pleasure making everything and I'm pleased to say Zena loves her gifts. More photos of her gifts are on my @craftylilmouse Instagram account and you can go see all the beautiful things Zena makes on her account @mycreativepottylife too!

As for my birthday stitchers swap parcel, I still have a while to wait. I am already getting excited and will share those as soon as they arrive...

These projects were on my finish-a-long list, so I can tick them as complete!!

Mx

Binding Tutorial: Method 2

For my second binding method, I cut strips 2 1/2" and press in half lengthways. The strips are then laid onto the front of the project, with the raw edges of the binding along the outer edge of the project. The binding is attached using the machine with a 1/4" seam allowance along the raw edge. Leave a loose tail of binding approximately 4" long at the start to allow for joining later. At the corners, I stop 1/4" from the end as seen in photo 1. I then fold the fabric away from the project, creating a 45` angle on the corner (photo 2). I then fold the binding strip up vertically to create a neat 90` angle on the corner, with the 45` fold inside and clip in place (photo 3). I restart sewing from the corner edge, continuing to use the 1/4" seam allowance and repeating for each corner.

 

I always start binding in the bottom centre of a project if possible and leave about a 3" gap for joining the binding. The join can be a little tricky to get it to a neat 45` the perfect length, but looks great once it's done and I think it's worth taking the time to do.

 

I start by opening out the binding so it lays flat. One end is folded down on a 45` angle away from the project, with RSU. The other end is then laid across so the binding strips are RST. Following the 45` angle of the fold beneath, I pin the strips together. The pinned binding is then carefully moved out from the project to enable access with the machine to sew along the 45` angle, joining the two strips.

 

Once joined, it is always best to check the binding will lay flat, (no excess which will crease and not too tight that its pulling). Once happy, I cut off the excess from the ends to leave just a 1/4" seam which I press open. Once the join is completed, the binding can be fully sewn onto the front.

 

 

 

With the front sewn on, the pressed edge of the binding can then be folded over to the back. It should look like the above photos at this stage. It is then time to sew on the back of the binding. This could be done by machine for speed, but I always prefer to hand sew using a ladder stitch for an invisible attachment. I gentle fold over the binding one section at a time, using binding clips to hold in place. These can mark fabric if left on too long so I always just do the bit I'm sewing then remove. The binding shouldn't be pulled so it is too tight over the edge of the project, but doesn't want to be left loose. Once clipped in place, simply ladder stitch along the pressed edge onto the backing fabric. This is easier if your backing is in one piece as its less bulky than having the extra seams of a patchwork, but can be done if your project is two sided. With the corners, simply follow the mitre from the front and fold the excess underneath to create the 45` joint before stitching.

 

 

The finished binding will look similar on both sides, something like the cushion in the example above.

 

Mx

Butterfly cross stitch

 

I made this little gift using the butterfly hoop kit from cross-stitch crazy magazine I got a while ago. I followed the kit to stitch up the butterflies on the front, but didn't like the plastic hoop supplied with it. I decided to paint a wooden hoop the same size using my own custom mixed lilac shade of Annie Sloan (I'm afraid I can't remember which colours went into it!).

 

 

I added the coordinating fabric to finish the back of the hoop, first glued and then ladder stitched to secure it in place. The final touch was some organza ribbon to create a hanging loop and bow to cover the screw.

 

 

I finished this project earlier, but couldn't share until now as it was part of a Christmas gift. It is on my Q4 finish-a-long list which you can find here ....

 

Mx

Sally’s choose and sew supply case...

 

One of the gifts I choose to make for Sally (my birthday stitchers partner) was a choose and sew supply case. She had suggested needing a sewing case for her EPP supplies. When she made herself the case I was planning on, I decided to make my own pattern.
 

I had already started planning the supply case, but thought Sally would prefer different options to me. We are good friends on instagram, so without giving it away that I was making for her, I asked what she’d prefer. I planned and worked out measurements. Next was fabric choice, cotton and steel was an obvious choice. I picked some patterns and colours I thought Sally would like, but wasn’t convinced by any for the outer of the case. I decided I’d join the #100hexies100days challenge on instagram and join them together for a cute fussy cut panel. Since I was making a large case, it took more than 100 and I was quite a long while hand stitching, but I’m so pleased I did now. 

For the inside of Sally’s supply case I decided to make a vinyl workspace with 2 pockets and a piece of felt, then a zip vinyl pocket at the back for storage. I did the binding with a flap closure construction method on this case. Of course, I made one of the snap in pouches and have sent the measurements to Sally for her to be able to make as many more as she wants. 
 

 

I also made some beaded zip pulls to finish it nicely. I really hope Sally likes her choose and sew supply case and finds it useful.
 

The pattern for the choose and supply case is now available in my Etsy store. It is a large pattern with 2 sizes and has lots of pocket options and 2 construction methods. It means you can make tons of different combinations, so that you can make the perfect case for you and maybe even one for a friend!
 

This project was also one of my finish a long projects, you can read  more of my list here.

Mx

Binding tutorial: method 1

There are two main methods of binding that I use. The first is a simple binding for smaller projects and the other I mainly use for quilts. I thought I'd write a tutorial for each. The first one today and then the second next month.

Method 1 uses 2” strips of fabric and is sewn on to your project with a 1/2” seam allowance. I sometimes join on the bias however in this example I have used straight seams. The benefits of straight seams are that it requires less fabric and is easier to sew.

 

  

 Cut 2” strips the width of fabric (110cm = WOF)

Place 2 strips right sides together and pin the 2" width at one end. Sew together using a 1/4” seam allowance, then press the seams open. 

 

Press the strips in half lengthways, wrong sides together. Then, bring the long raw edges into the middle crease and press along again.

To attach the binding to your project:
1. Clip the binding onto the bottom edge with a few inches extra at the end for joining later. Stitch the binding on using a scant 1/2"seam allowance.
2. Measure and mark 1/2" from the corner and stop stitching when you reach the mark.

3. To shape the corner, fold the binding down wrong side together, vertically in line with the edge of the project, to create a 45 degree angle on the corner. Holding the corner in place, fold the binding back up and clip in place ensuring it is aligned along the corner edges.

4. Stitch from the bottom edge up to the next corner, stopping 1/2” before the end.

5. Repeat step 3 for each corner and continue sewing until you have about 3” before you reach the start of the binding, then stop.
6. To join the two ends, mark a line about 1” in from the end then fold it back on itself, wrong side together. Lay the other end of the strip over the top, right sides together and pin, only catching the top 2 layers of fabric.

7. Fold over to check, that it lays flat and the binding strips meet at the marked line. Make sure to secure the join in place with pins before you move it to sew.

8. Move the binding so the join overhangs the project. Stitch along the marked line to join the 2 layers of binding together. Once sewn, double check the binding lays flat along your project and trim to leave a 1/4"seam allowance, then press the seam open.

9. Stitch the joined section of binding to the project, again using the scant 1/2" seam allowance.

To finish your binding, turn over your project. Bring the binding over to the back, folding the raw edge in and the folded edge down. Clip to hold in place and hand stitch in place on the reverse. I use a ladder stitch although a slip stitch would also be fine. Alternatively, you can use a machine to top stitch close to the edge of the binding.

Mx

 

My birthday stitchers swap

 

This year I signed up to take part in a birthday stitcher swap, over on Instagram. I recently had my birthday and these are the wonderful gifts I received. Maria (aka @madame_tailor on Instagram) sent my gifts from Germany.

First is my main handmade gift, which is this super carry all caddy. Marie used some beautiful art gallery fabrics and rose gold hardware. It looks so pretty plus with so much space and pockets, I’m sure will be very useful for holding plenty of projects.

 

 

 

 

My second handmade gift was this mini makers station, which is designed to go over the arm of a chair. It has some great pockets on either side, a thread catcher which buttons on and a tray on top. It has magnets in the bottom of the tray and pin cushion to stop them falling off and so you can use it separately too if you wanted. Maria used some more of the sonata fabrics that coordinated with the caddy. It is backed with a really great low volume print that I love. The third handmade item is this adorable mouse toy. She has a pretty dress and a beautiful hand stitched face, even some blush.

 

 

 

Lastly is this Lola zip pouch. It matches the other 2 gifts and I think it is my favourite print from that range too. They look so lovely together, I definitely think I will have to keep them all together and be super organised. 

 

Maria also included a few other extras including a mini charm, pin cushion ring and ribbon (shown in the makers station above) some chocolates and bath soaps. Not forgetting my dog, Millie, who also got some treats and a toy... Although she was rather more interested in my mouse! 

 

 

I can’t share what gifts I have made for my partner yet, because it’s not my her birthday until later this year. I would say I don’t want to spoil the surprise, which I don’t, but I also haven’t made them yet! 

 

Mx