halloween bunting!!

• basic grey for moda cotton (Halloween fabric) 3 x half a metre
• iron on interfacing (medium weight) 1.5 metres
• black bias binding (1 inch wide) 9 metres
• sew easy equilateral 60' triangle template

I cut 3 different patterned fabrics into 5 1/2" strips. I cut these into the bunting shape using the sew easy- equilateral 60' triangle template. I cut interfacing into 5" strips and used the template to cut my triangles. I ended up with 96 fabric triangles and 48 of the interfacing. I then paired up the fabric triangles with one layer of interfacing for each pair. I then ironed the interfacing to one of the triangles from each pair, before sewing the pair of fabric triangles right sides together leaving the top edge open. I then trimmed the excess fabric with pinking shears and turned them right way around. I then pressed each of the triangles to keep the edges neat and shapes flat. To assemble the bunting, I first arranged the colours into the desired pattern. I then folded the binding in half and ironed along the full length to create a crease. Each of the triangles was then placed between the binding and pinned into position, leaving an inch gap between them and 5 inch spare on either end. The final stage was to sew along the entire length of the binding to secure all of the triangles in place.

 

The bunting was then ready to hang for a party or special occasion. This one is for Halloween but a change of fabric could make it perfect for any occasion or just for interior décor !! It can also be a great project for scrap busting to use up those offcuts of different fabrics. This project did leave me with some spare fabric which could be used up in other projects or a miniature version of bunting.

 

Mx